Smart Analysis System

POSITION: Home > Products> Smart Analysis System

KF21

Description:

  • * Accuracy:≤±0.2℃(±0.4°F);
  • * Surface/Body Mode;
  • * Body Range:35℃-42℃;
  • * Body Range:(95°F-107.6°F);
  • * Surface Mode Range:0℃-60℃(32°F-140°F);
  • * Backgroud Color:≤37.3℃(Green Color)/﹥37.3℃(Yellow)/﹥38.0℃(Red);
  • * Response Tiem:≤0.5s;
  • * Number of Memory Storage:20 Group;
  • * Measure Distance:3-5CM;
  • * Power:DC 3V(AAA*2pcs).

1. Safety Information

  • This device must only be used in an ambient temperature environment range from 10"C to 40"C.

  • Do not expose this thermometer to extreme temperature conditions of >40"C or<0c.< p="">

  • Do not use the device in conditions of relative humidity higher than 85%RH.

  • Do not use the device near large electromagnetic fields such as found with cordless or cell phones.

  • Keep the device away from water and heat and avoid direct sunlight.

  • Do not drop or knock the device, and do not use if damaged.

  • The body infrared thermometer should be left in a new place for 15 to 20 minutes before using.

  • lt may affect the accuracy of measurements when the forehead is covered

  • by perspiration or other factors, please take the temperature behind the ear lobe.


2. General Description

Infrared Thermometer is specially designed to measure the body temperature of
aperson .Foron various skin types and thickness, there may be temperature difference. When the indoor temperature is significant difference,the body infrared thermometer should be placed in that room for 15 to 20
minutes before using.

1.1 Products Name: Infrared Thermometer
1.2 Configuration

4.Products Features

1.Automatic stop                            2.Bodytemperature memory
3.Fasttemperature measurement       4.Feverwarning
5.Temperature compensation            6.20 sets of memory
7.celsius (C) /Fahrenheit (C) unit switching

5.Operating Instructions

Aim towards the forehead, from a distance of 3~5cm, press the measuring
button, the display screen lights up the display screen automatically and gives
aprompt measuring result. Ifthe measuring temperature is higher than the
warning temperature, the display screen will change but not the original
green color.

Notes during measurement

1)In orderto obtain reliable and stable results, when changing the
environment to a room with a significant temperature difference, it is
recommended to leave the Infrared Thermometer to this ambient
temperature for 15 to 20 minutes before using it.

2)For position not in effective distance or misalignment in measured center
position, there may be temperature difference, it is recommended to do
repeated measurement.

3)Measure in the applicable range of technical specifications and in the
environment with low wind speed.

5.2 Save and query of memory value

1) Steps for memory value saving are as follow:
Data memory automatically after temperature measurements, which can
memorize the last 20 measuremen


Working ConditionsAmbient temperature:16℃~35℃
Relative humidity:≤85%
Power DC 3V, 2*1.5V (AAA) battery
Display Resolution0.1℃
Measuring RangeBody temperature 35.0℃~42.0℃(95°F~107.6°F)
Surface temperature 0℃~60℃
Power50mw
Measuring Accuracy(35.0℃~42.0℃)±0. 2℃
Measuring Time<0.5 seconds
Measuring Distance3cm-5cm
Automatic Stop15 seconds
Number of Memory Storage Groups20 groups